 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Series AMPL-UZ 10A Up to 50 Watt | DC-DC Converter FEATURES: * * * * POL delivering 10A output current Programmable output voltage Remote output sense Remote On/Off Control Function * * * * Output Over current protection Over temperature protection Operating temperature -40 to 85C Industry standard SMD footprint Models Single output Model AMPL-0510-UZ AMPL-1210-UZ Nom. Input Voltage (V) 5 12 Output Voltage (V) 0.75, 1, 1.2, 1.5, 1.8, 2, 2.5, 3.3 0.75, 1, 1.2, 1.5, 1.8, 2, 2.5, 3.3, 5 Output Current max (A) 10 10 Efficiency (%) 97 96 Input Specifications Parameters Voltage range Nominal 5 12 Typical 3~5.5 10~14 Maximum Units V Output Specifications Parameters Set point Voltage accuracy Trim range Remote sense compensation Short Circuit protection Short Circuit restart Line voltage regulation Load voltage regulation Turn-on delay time Rise time Temperature coefficient Ripple & Noise Load transient voltage Setting time Maximum capacitive load Conditions Full Resistive load R<10 Full Resistive load NL-FL Full Resistive load (0.1~0.9) of Vout At 20MHz Bandwidth Vout < 10% Peak Deviation Min ESR >10m Typical 2 0.75~3.63 0.5 Maximum Units % V V Continuous Auto recovery 0.5 0.5 2 1.5 0.02 50 160 50 5000 % of Vin % ms ms %/oC m Vp-p mV s F General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 300 KHz o Operating temperature -40 to +85 C o Storage temperature -55 to +125 C Cooling Free air convection Humidity 10 ~ 90 % Weight 7 g Dimensions (L x W x H) 1.30 x 0.53 x 0.27 inches 33.00 x 13.46 x 6.70mm MTBF > 5,000,000hrs, Bellcore TR332, 25 oC NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. www.aimtec.com F 055e R3.C Tel: +1 514 620 2722 1 of 9 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMPL-UZ 10A Up to 50 Watt | DC-DC Converter Pin Out Specifications Pin 1 2 3 4 5 6 Single +V Input On/Off Control Sense Trim +V out GND Dimensions Voltage Adjustment Vout (VDC) 0.75 1.0 1.2 1.5 1.8 2.0 2.5 3.3 5.0 R trim value in K for 3~5.5V Vin (VDC) Open 80.6 42.2 23.2 15 11.8 6.98 3.16 2.21 R trim value in K for 10~14V Vin (VDC) Open 41.2 22.6 13 9.09 7.32 4.99 3.09 1.47 Typical Application: With not using a Control function: www.aimtec.com F 055e R3.C Tel: +1 514 620 2722 2 of 9 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMPL-UZ 10A Up to 50 Watt | DC-DC Converter With using a Control option: Output ripple and Noise Measurement - test set up: Note: This test set up configuration for measuring the output voltage ripple and the reflected input ripple current is using C1 and C3 tantalum capacitors with ESR<150m and C2 and C4 ceramic capacitors. Efficiency curves versus load current, at 3 ~ 5.5V input for each output voltage setting (25C): Vout 0.75V: Vout 1V: www.aimtec.com F 055e R3.C Tel: +1 514 620 2722 3 of 9 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMPL-UZ 10A Up to 50 Watt | DC-DC Converter Efficiency curves versus load current, at 3 ~ 5.5V input for each output voltage setting (25C): (continued): Vout 1.2V Vout 1.5V Vout 1.8V Vout 2V Vout 2.5V Vout 3.3V www.aimtec.com F 055e R3.C Tel: +1 514 620 2722 4 of 9 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMPL-UZ 10A Up to 50 Watt | DC-DC Converter Derating curve at 3 ~ 5.5V input: Vout 0.75, 1, 1.2, 1.5V: Vout 1.8, 2V www.aimtec.com F 055e R3.C Output Power (%) Output Power (%) Tel: +1 514 620 2722 5 of 9 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMPL-UZ 10A Up to 50 Watt | DC-DC Converter Vout 2.5, 3.3V Efficiency curves versus load current, at 10 ~ 14V input for each output voltage setting (25C): Vout 0.75V: Vout 1V: Vout 1.2V Output Power (%) Vout 1.5V www.aimtec.com F 055e R3.C Tel: +1 514 620 2722 6 of 9 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMPL-UZ 10A Up to 50 Watt | DC-DC Converter Efficiency curves versus load current, at 10 ~ 14V input for each output voltage setting (25C) (continued): Vout 1.8V Vout 2V Vout 2.5V Vout 3.3V Vout 5V www.aimtec.com F 055e R3.C Tel: +1 514 620 2722 7 of 9 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMPL-UZ 10A Up to 50 Watt | DC-DC Converter Derating curve at 10 ~ 14V input: Vout 0.75, 1, 1.2, 1.5V: Vout 1.8, 2, 2.5V 100 80 B C A 1.0 M/S 60 C A Safe Operating Area 60 40 20 0 20 30 40 50 60 B 1.5 M/S 70 C C 2.0 M/S 70 C 70 80 85 90 Ambient Temperature C www.aimtec.com F 055e R3.C Tel: +1 514 620 2722 8 of 9 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMPL-UZ 10A Up to 50 Watt | DC-DC Converter Derating curve at 10 ~ 14V input (continued): Vout 3.3, 5V NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified.5..Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 5. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. www.aimtec.com F 055e R3.C Output Power (%) Tel: +1 514 620 2722 9 of 9 Toll free: + 1 888 9 AIMTEC (924 6832) North America only |
Price & Availability of AMPL-0510-UZ
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |